->

Cangzhou Spiral Steel Pipes Group Co.,Ltd.

  • Current location-Return Home > Epoxy powder (FBE) >
    Single layer fused epoxy powder corrosion - resistant steel
    Release date:2016-11-07


    Single layer fused epoxy powder corrosion - resistant steel pipe
     
    Fused epoxy powder coating referred to FBE, FBE outer coating is a film structure.
    The outer surface of steel pipe shall be sprayed (cast) with the grade of Sa2.5 as specified in GB / T 8923. The depth of the surface of the steel pipe shall be in the range of 40 ~ And should monitor the temperature of the outer surface of the steel pipe immediately before the epoxy powder coating, and control the temperature within the recommended range of the powder manufacturer, but the maximum shall not exceed 275 ℃.
    Repairing of Single Layer Fused Epoxy Powder Anticorrosion
    When defects are found on the FBE pipe, all the rust, scale, cracks, dirt and other impurities and loose coating of the defective parts should be removed. The defective parts shall be polished to a rough surface, and the dust shall be removed with a dry cloth or brush. Clean, with two-component liquid epoxy resin coating for local repair.

    上一篇:Inner epoxy powder anti-corrosion steel pipe
    下一篇:没有了
    L360 spiral steel pip
    Cement mortar anti -
    Double - sided submer
    q345b Spiral steel pi
    Three cloth four oil
    l290 Spiral steel pip
    API Spiral steel pipe
    Prefabricated polyure