|
|
|
 |
 |
| Bridge Crane: 32-ton heavy steel coil can be lifted. |
 |
| Uncoiler: double cone head uncoiler, removable 32 tons of steel coil. | |
| Straightening machine: for the seven-roll leveling, thickness up to 20mm. | |
| Shears: 2000mm * 20mm coil can be cut. | |
| Welding machine: welding steel head and tail. | |
| Disc scissors: cut the board to meet the specified size of the burr. | |
| Milling machine: ≥ 10mm of the steel plate processed into the required groove. | |
| Vertical roller device: to ensure that steel along the delivery line. | |
| Delivery machine: two-roller conveyor for the main driving force. | |
| Guide plate: to ensure the balance of steel into the molding machine. | |
| Forming machine and the bridge, the output roller, three-roll bending and external roller sizing machine: |
 |
| Can be formed Φ219-Φ3500mm steel pipe. | |
| Inside and outside the welding device: single-wire welding, welding double wire, use Lincoln welder, | |
| And infrared thermal imaging within the welding tracking control system. | |
| Flux recovery device: Recover solder flux after welding. | |
| Automatic external welding device: repair weld defects. | |
| Flat head chamfering machine: to ensure the standard end of the pipe requirements. | |
| Hydraulic pressure testing machine: 100% water pressure test. | |
| Weighing device: Weigh and measure the length of steel pipe. |
 |
|
|
1, industrial television inspection equipment: inspection within the weld appearance quality.
2, magnetic flaw detector: test near the table pipe defects.
3, ultrasonic automatic continuous flaw detector: inspection of steel pipe length of the transverse and longitudinal weld defects.
4, ultrasonic manual flaw detector: re-examination of defects in steel pipe, weld inspection and water pressure weld quality.
5, X-ray automatic flaw detector and industrial television imaging equipment: inspection of the internal quality of steel pipe length weld, the sensitivity of not less than 4%.
6, X-ray film equipment: the original weld and weld inspection weld, the sensitivity of not less than 2%.
|
 |
|
7,2200 tons of hydraulic press and computer automatic recording system: test the pressure of each pipe quality.
8, mechanical properties test equipment:
A hydraulic universal testing machine and computer control system: complete the base metal and weld mechanical properties tests, including tension, guide bending, 100 kN, 300 kN, 600 kN and 1000 kN, and several other types.
B slot machine: for Charpy impact test slot processing.
C Charpy impact testing machine: Charpy impact test at each test temperature, the impact of 300J.
D processing a variety of sample machine: including cars, milling, planing, grinding machines.
E low temperature box: the lowest temperature -80 ℃
9, chemical composition analysis instruments:
A direct reading spectrometer: can detect 26 kinds of chemical elements.
B hardness tester: a HV10kg, HBRV187.5kg, HR150kg and HB3000kg and other categories
|
|
|
